Wyłączny przedstawiciel firmy

Peryferia Video

Peryferia Video: VisionRGB-E2S Video Capture

VisionRGB-E2S Video Capture

Producent: Data Path

The VisionRGB-E2S, a stand alone PCI Express x4 plug in card, delivers extreme performance with 650MB/s transfer bus bandwidth providing a further improvement to the 480MB/s of the VisionRGB-E2.

The VisionRGB-E2S has two complete capture channels supporting up to 1920x1200 DVI or 2048x1536 Analog resolution.
The VisionRGB-E2S captures the Analog/DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage or streaming.
When a Datapath graphics card is used, the VisionRGB-E2S transfers the data directly to the graphics card thereby increasing performance. The VisionRGB-E2S sends the relevant portions of each channel to use its graphics engine to render the data. This fully utilises the hardware and dramatically increases performance
Board format PCI Express x4 half size card, 110mm x 170mm
PCI Express bus master with scatter gather DMA
Connectors Two DVI-I type connectors
Maximum sample rate 170Mpixels per second analog RGB or 165 MHz DVI.
Analog modes up to 340MHz pixel clock can be captured using dual-pass sampling
Maximum data rate
VisionRGB-E2 480 MB/s
VisionRGB-E2s 650 MB/s
Video sampling RGB:  24 bits per pixel/8-8-8 format
Video capture memory 64 MB (updated in real time).  Triple buffered
Analog RGB mode support 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920 x 1080, 2048 x 1536,Custom modes
DVI single link mode support 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920x1080, 1920 x 1200, and Custom modes
HD modes 1080p,1080i, 720p, 576p, 576i, 480p and 480i using a Component HD-DVI connector (HDCP not supported)
Input mode detection Automatic detection of input modes in hardware enabling the tracking of mode changes in the source signal
Pixel transfer formats
RGB:  555, 565 or 888 pixels (24bit/32bit) pixels.
YUV 4:2:2,  UYVY, YUY2, YVYU
Update rate
User defined, captured frame rate will match the source providing max data rate (650MB/s is not exceeded)
Triple buffered to eliminate tearing artifacts.
Video format options
Analog RGB plus HSync and VSync (5 wire)
Analog RGB with Composite Sync (4 wire)
Analog RGB with Sync on Green (3 wire)
DVI Single Link
Operating system support Windows® XP Professional, Windows® Server 2003, Windows Vista®, Windows® Server 2008 and Windows® 7 (x86 and x64 Operating Systems)
Power requirements
Max current at +3.3V - 0.25A.
Max current at +12V - 1.2A.
Max power - 15 Watts.
Operating temperature 0 to 35 deg C.
Storage temperature -20 to 70 deg C.
Relative humidity 5% to 90% non-condensing
Analog input range Min 0.5Vpp  Max 1.0Vpp
Input offset +/- 2V
Hsync 15kHz - 110kHz
Vsync No hardware limits, typically 25Hz - 200Hz for real signals
Separate sync polarity Positive or Negative.  (Separate H & V sync, Composite Sync)
Sync on green polarity Negative
Inputs 75 Ohm terminated